For larger spaces like your garage door or back patio, it might benefit you to invest in an additional motion detector. These devices can be configured to detect movement up to 30 feet, sending alerts to your phone whenever something enters the monitored area. As long as you mount the detector on a wall or corner of a room above seven feet, it shouldn’t be triggered by movement from small pets or pests, though that has still been known to happen.


The square wireless base station is the main component of the Ring Alarm system. It's 6.7 x 6.7 x 1.4 inches in size, and though it lay flat on a bookshelf for this review, it can be mounted on a wall. The base station has ZigBee and Z-Wave antennas, and while the latter is available to use with compatible third-party accessories, anything that isn't Ring-certified won't work with security monitoring.
Ring lacks third-party integrations. The Base Station communicates with Z-Wave and Zigbee, and I’ve confirmed those protocols were added for a reason, but they haven’t taken advantage of them. The system supports the First Alert Z-Wave Smoke/CO detector which is also compatible with the Ring Response service. Soon, it will also work with the Dome Siren. But that’s it. Ring currently lacks an IFTTT channel and even an Alexa integration, which is odd as Ring is owned by Amazon.
I’m not certain about Nest, but I asked abode about this before. They said, “We have what is called abode Signal Guard. Unlike other smash and grab solutions, the Signal Guard works whether your system is self-monitored or professionally monitored. The abode Signal Guard alarm acts just like a normal alarm where notifications are sent and the siren(s) go off until the alarm is disabled. If you are a professionally monitored customer, the monitoring center is notified of the abode Signal Guard event.”
So this Ring Video Doorbell worked for about 4 months. I came home one day and the door bell button was stuck in the down position and the unit burned out. I contacted Ring and customer service was receptive and sent me a replacement unit. Unfortunately the replacement unit had trouble connecting to my solid wi-fi and I was directed to reboot the unit by holding down the orange button for 20 seconds. After the unit was rebooted it connected to wi-fi but would not charge or ring my mechanical door chime. My unit was hardwired to my doorbell using a 16 volt transformer and mechanical door bell and the first unit worked fine until it burned out. I spent some time on chat with customer service going through all the troubleshooting when they eventually agreed to send another replacement unit.

Never wonder who’s knocking at your door again. With the Ring Doorbell, you’ll receive alerts when your doorbell is pressed or motion is detected, allowing you to hear and interact with visitors. In addition to acting as a two-way communication device for your front door, it works as a security system; you can set motion detection zones from five to 30 feet outside your door. The sensor is quite sensitive, so it’s probably best to set its range and awareness levels as low as you’re comfortable with. If you’re willing to venture off Amazon (and pay a little more), the Nest Hello doorbell is another favorite option that works with Alexa.
Oco Pro Cloud Video Surveillance Camera is easy Oco Pro Cloud Video Surveillance Camera is easy to use HD Wi-Fi camera with Cloud and SD card Recording for monitoring everything you care about: business home children pets elderly parents etc. No Monthly Fees required to access all camera features: Self-learning motion detection system helps Oco understand motion and ...  More + Product Details Close
There's also a Motion Snooze button that lets you temporarily disable motion alerts for 15 or 30 minutes or for 1 or 2 hours. The App Alert Tones button lets you select one of 20 sounds to play when the doorbell is pressed, or one of 16 sounds to play when motion is detected, and the Shared Users button lets you add users who can view video and receive alerts. Use the Ring+ button to link the Ring app to one of Ring's partners such as Wink, Kevo, LockState, and Wemo. Once linked, you can access a partner app from within the Ring app.
Aside from the obvious value proposition, Ring’s big pitch for the Alarm system is its simplicity. Though it has all of the features necessary for a proper home security system – professional monitoring, battery and cellular backup for the event of a power loss – installing the Ring Alarm in my home took less than 20 minutes and involved following the app’s instructions to get the base station on my Wi-Fi network and register each included piece. Cleverly, Ring presets the included motion detector, contact sensor, and range extender to pair with the hub that’s in the box, so getting them set up is just a matter of pulling the battery tab to wake them up and waiting a moment for the app to find them.
In fact, just this week I had the power go out at my home, which is also where my office is. I had deadlines to meet, so I decided to go to a coffee shop where I could work and fill up on caffeine. It wasn't until I walked into my garage that I remembered I had to manually open the garage door, disconnecting the door from the chain drive. My particular garage door opener wouldn't let me reconnect the door and the chain drive, locking it in place, so I was stuck with a garage door that anyone could lift open with ease.

When you attach the Ring Video Doorbell Pro from Ring to your existing hardwired doorbell, you are able to monitor your front door area using your mobile device. The Ring Doorbell Pro features 1920 x 1080 resolution for high-quality images, and it has built-in IR LEDs for use at night or in low-light conditions. The camera has a 160° field of view for a wide coverage area, and integrated 2-way audio allows you to listen and respond to those you are monitoring
Ring says the battery should last anywhere from six to 12 months between charges, depending on how much activity your doorbell receives. Those claims might be a bit inflated, though. In my experience, the battery drained to under 40 percent in about six weeks of use, which means I’ll be recharging it every three months. For my testing, I had all the features enabled, such as motion detection and quick live view access. Ring says disabling these features will extend the battery life.
For doors especially, I much prefer sensors that can be embedded into the door and doorframe, so they’re completely hidden. As I mentioned earlier, Nest really innovated on this front, embedding pathway lights and secondary motion sensors into its Nest Detect sensors. Ring sensors have an LED that lights up when activated, and the base station (but not the keypad) will chirp when a sensor is activated, but that’s about it. But it’s worth noting that a basic Nest Secure system costs $499 to the Ring Alarm’s $199, and Nest Detect sensors cost $59 each where Ring’s cost just $20 (extra Ring motion sensors are priced at $30 each).
Nest Secure’s monitoring service is provided by Brinks Security. Originally, service was offered by MONI before MONI, LiveWatch, and Brinks merged to form the Brinks brand. Monitoring of Nest equipment through Brinks is $29.00 per month plus the cost of equipment. If purchased through Brinks, equipment is only $299 for Nest Guard, two Nest Tags, and two Nest Detect Sensors. If you want a discount on Nest Secure services, your only option is to sign a contract. With a three-year contract, you’ll pay $19.00 per month; equipment remains at $299.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
3 - If you do not answer the alert fast enough, you are locked out-- even though someone is standing at your front door. You cannot "turn on" the camera from your phone or tablet. If someone is there and you do not have an "ACCEPT" button on the screen, there is just no way to see or talk to them. This is obviously a software flaw. You should always be able to "wake" a camera remotely and talk to a person at your front door. Or maybe you just want to see the view outside your front door. You should be able to access the camera / microphone and enjoy your front yard.
×