Like most security systems, Ring Alarm has two armed modes: Home activates the door/window sensors, but leaves the motion sensor turned off. This allows you to walk around inside your secured home without triggering the alarm. Away mode arms all the sensors, so if intruders break in through an entry point that isn’t protected by a sensor, the motion sensor will trigger the alarm when they walk within its range. One motion sensor can do the work of many door/window sensors.
The Ring Alarm system does not include fire or carbon monoxide monitoring – for those features, you’ll need to add a First Alert Z-Wave Smoke/CO alarm ($40) or Ring’s Alarm Smoke and CO listener ($35) that gets installed next to your existing smoke alarms and “hears” when they go off to trigger the system. I was not able to test these products for this review.
Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home. You won’t be locked into any long-term contracts. You don’t need professional installation. You don’t even need any tools. It’s that simple.
Just as heads-up, customer support from Ring was top-notch. After a week of use, I had an issue with a sensor that wasn’t communicating properly. Fortunately it didn’t trip the alarm (I say fortunate as I wouldn’t want to local police to show up for faulty sensor). A late night call to the Ring customer service, which appears to be U.S. based, helped to resolve the issue. The rep was professional and patient. All told, I’m glad I chose Ring.
Unfortunately, Ring doesn’t offer any professional monitoring services at this time; however, they do offer two video recording packages without a contract and they don’t have any other subscription requirements. Additionally, they are not currently offering any deals or discounts other than the 10% discount you will receive on all future purchases if you are a Protect Plus member, which is their premium unlimited video recording service. They also have a one year warranty on all their equipment unless you are a Protect Plus Plan member which entitles you to a lifetime warranty on all your equipment, as long as you remain a Protect Plus member. Check out the full review of Ring Doorbell here.
Consumer Reports is an independent, non-profit organization dedicated to helping consumers. We make it easy to buy the right product from a variety of retailers. Clicking a retailer link will take you to that retailer’s website to shop. When you shop through retailer links on our site, we may earn an affiliate commission – 100% of the fees we collect are used to support our mission. Learn more. Our service is unbiased: retailers can’t influence placement. All prices are subject to change.
Next, they have plans to sell a Ring Smoke & CO Listener that listens for the sound of your smoke detector then sounds your siren and sends an alert if anything is detected. Keep in mind that this is not a smoke detector, but rather a device that will supplement your current smoke alarm system. As already mentioned, you can also buy the First Alert Z-Wave Smoke/CO Alarm, which will connect to your Ring Alarm system.
All the components in the Ring Alarm system use Z-Wave Plus radios and support Z-Wave’s S2 security framework, but Harris told me there’s also a ZigBee radio onboard as well as some other surprises that aren’t discussed in the user manual. “You’ve got Wi-Fi, you’ve got LTE, you’ve got Z-Wave, you’ve got ZigBee….” Harris said. “I’m sure people will open it up and see there’s another radio in there that’s not turned on yet. There’s an awful lot going on in there.”
The upshot: When that sketchy person comes to your door asking for “charitable donations,” you can compliment his appearance—nice prison tats!—and tell him you’re too busy to talk right now. Who knows, maybe you’re feeding your Belgian Malinois attack dogs. Or are you? The robber will never know that you’re actually speaking to him from a restaurant. In another state.
Moving on...If you are installing the hard wired RIng doorbell version (not wireless) just remember to shut off the power to the doorbell prior to installing. I installed the doorbell, downloaded the free application for my wife and I, added the adapters to my current doorbell, and set the "Motion Zone". The entire process took approximately 40 minutes. Having the set "Motion Zones" helps us out a lot so we do not get "Motion Detected" alerts from people on the sidewalk but anything closer to my home it goes off. Everything works flawlessly and the speaker sounds great. Images and video during day and night are clear. No issues hearing the person at my door nor them hearing me. My wife loved it as much as I did and we decided to get a second one for our second door (plus it was a Amazon special we could not pass up!).
Once devices are added, you can create rules through abode’s built-in automation engine which they call CUE. CUE works similarly to IFTTT in that you can create rules in an ‘If This Then That’ format, but it takes things a step further by allowing you to create an optional condition. For example, if the front door is closed, lock the front door, but only if it’s dark outside.
The Ring Alarm starter kit is one of the most affordable security systems available. For $200, you get a wireless base station, a keypad for arming and disarming the system, one entry sensor, one motion sensor and a Z-wave range extender. I would have liked the kit to include at least two entry sensors since there's typically more than one point of entry to every dwelling, but you can purchase additional entry sensors for $20 a piece.
The biggest physical difference between the Doorbell 2 and the original is the new, slide-out battery. With the first model, recharging the battery required removing the entire doorbell from the frame and plugging it in for five to six hours. The new, removable battery (which looks like something you might find in a DSLR or camcorder) is much easier to charge: you just remove the front panel of the doorbell (a security screw underneath needs to be removed with the included screwdriver first), slide the battery out, and plug that into a Micro USB cable. Charging still takes five or six hours — it’s a hefty, 6,100mAh battery and this doesn’t have any quick charging features you might find on a smartphone — but the modularity of this design means you can buy a second battery and put that in to keep your doorbell functional while the other charges. Ring provides one battery in the box, but you can buy spares from Ring’s website for a reasonable $20.
Ring Alarm doesn’t support smart lighting controls, door locks, thermostats, garage-door openers, or other common smart home products today, and there’s a very short list of supported third-party products. But it lacks nothing needed to support those and similar devices down the road. And in an interview with Ring Solutions president Mike Harris earlier this week, I learned that’s exactly what Ring intends to do.