The Ring Pro captures video at 1080p and has a 160-degree field of view. It uses three infrared LEDs to provide up to 30 feet of night vision and has a built-in motion sensor, a microphone, a speaker, and an interior chime. The camera uses 802.11n circuitry (2.4GHz and 5GHz) to connect to your home Wi-Fi, and requires a two-wire 16-24 volt power source (the same power source used for traditional doorbells). In addition to the camera, there's a doorbell button on the face of the device surrounded by an LED ring that glows blue when the button is pressed. There are two terminals on the back, and a setup button on the right side that you can get to by removing the faceplate.
Ring provides 24 / 7 professional monitoring of the Alarm system through its Protect Plus service, which will automatically notify authorities and emergency services if there’s an intrusion or crisis detected. The service will alert you and other emergency contacts you set via phone and then dispatch emergency personnel as needed. Though the Ring Alarm will provide push notifications to your mobile device without the additional monitoring service, having the service ensures that emergency services are deployed automatically whether you see the push notifications or not.
Thanks to advances in sensors and other smart home technology, the landscape of home security systems is changing dramatically. It’s now possible to install a professionally monitored system in your home yourself in just a matter of minutes. You can even bring the system along with you when you move to another house or apartment. And the cost for these new systems is far less than traditional home security plans.
This is probably the best part about this alarm, that there is no need for a desktop PC to reach any advanced features and that you can configure it from anywhere. From arming the alarm from work (if you forgot to arm it before leaving), to disarming remotely if needed. App is extremely user friendly and very intuitive, so this is probably the best part. Very well organized and all Ring devices can be controlled from within the same app.
Second, Ring sells a contact sensor. The two-piece sensor can be placed on doors or windows and will notify you of open/close movements. Third, they sell a pet-friendly motion detector. Fourth, they sell a range extender. The range extender is the only sensor that requires AC power, but it also includes 24-hour battery backup. The Range Extender is used to boost the signal emitted by your Base Station to help eliminate dead zones.
abode uses the abode app. If an event occurs, you will receive a notification on your phone. From the app, you can decide how to respond to events. You can review video footage, notify the police, the monitoring center, or even your family. You can also view sensor history and manage your rules. For example, you can create a “coming home” rule that turns on the lights and unlocks the door. And of course, you can use the app to arm and disarm the system.
The other major part of the Ring Alarm kit is the 5.9 x 3.9 x 0.9-inch keypad, which can also be laid flat or hung on the wall. The keypad has 12 backlit number buttons, as well as three other buttons for quickly arming and disarming the system (though it's also possible to do so from the Ring app for iOS and Android). The buttons are plastic and easy to clean, and by default, they chime when pressed. I like that the keypad is handheld, but I still much prefer the rubberized remote keypad offered by SimpliSafe.
By default, Ring Alarm offers three modes: Unarmed, Home and Armed, and Away and Armed. You can use the keypad to change modes, or use the mobile app, which also offers access to any Ring cameras you might have set up in your home. The app also provides status updates on any connected devices you have in the house, a separate history log for the alarm system and the cameras, a settings panel for configuring professional monitoring and what each mode does when activated.
The square wireless base station is the main component of the Ring Alarm system. It's 6.7 x 6.7 x 1.4 inches in size, and though it lay flat on a bookshelf for this review, it can be mounted on a wall. The base station has ZigBee and Z-Wave antennas, and while the latter is available to use with compatible third-party accessories, anything that isn't Ring-certified won't work with security monitoring.
Once you're logged in, follow the straightforward prompts to connect each accessory. This was one of the easiest security system setups I've ever encountered; literally pull the battery tab on the battery-powered door/window sensor and motion sensor and plug in the base station, the keypad and the Z-Wave range extender, and they automatically connect to the app.
Installing the actual ring was even easier. I was able to drill into grout lines between stones so I had that going for me. The hook up was super easy, two wires from the house connect to the two connectors on the Ring – doesn’t even matter which is which. Nice and easy. I will have to work out something to cover the shimmed side, but I’ll work something out.
The abode Gateway also supports limited local functionality. This is in part thanks to the Gateway’s ability to communicate using its own proprietary protocol called abodeRF. If your internet is down, your automated rules will continue to run, assuming that the devices involved are connected to the Gateway directly and not through a third-party service like IFTTT.
Setting up a smart security system requires you to consider the size of the space you want to protect, the tech capabilities that are most important to you, as well as the tech stack you want to use. Ring’s products are all Alexa-enabled, meaning they can be easily integrated into your existing smart home set-up. Plus, the company offers Protect Plus 24/7 Professional Monitoring for $10 per month. (Compare this to Nest’s similar service, which will ding you $19-29 over the same period.)
My Wi-Fi problems notwithstanding, both the doorbell and chime accessory were easy to pair with my wireless network. Just a word of caution: If you’re using a Wi-Fi range extender, make sure to pair the doorbell outside your house, right on your doorstep. This will ensure that Ring finds the extender, and not your router. If you pair the doorbell inside your home, you run the risk of pairing it with your main Wi-Fi router, especially if your router and range extender have different names.
All that said, the biggest flaw with price is that purchasing Nest’s multi-purpose sensors may be forcing you to purchase more equipment than you need. Most homes don’t need three motion sensors, especially if the sensors have a decent range. Remember, Nest’s motion detectors only detect movement within a 10-foot range, the abode motion sensor has a 120° field of view and can detect motion within a 34-foot range so you would need at least two Nest motion-enabled devices for every one abode motion sensor. Ring’s motion sensor’s range is unlisted, but I tested it at 35 feet, and it worked perfectly.
Nest Secure’s monitoring service is provided by Brinks Security. Originally, service was offered by MONI before MONI, LiveWatch, and Brinks merged to form the Brinks brand. Monitoring of Nest equipment through Brinks is $29.00 per month plus the cost of equipment. If purchased through Brinks, equipment is only $299 for Nest Guard, two Nest Tags, and two Nest Detect Sensors. If you want a discount on Nest Secure services, your only option is to sign a contract. With a three-year contract, you’ll pay $19.00 per month; equipment remains at $299.
The camera's motion sensor worked without a hitch, as did the pre-buffer feature. I always received a push notification, and the camera never failed to record a clip when the sensor was triggered or when the doorbell button was pressed. I created an IFTTT applet to have a D-Link Smart Switch turn on a lamp whenever the doorbell button was pressed, and it worked without fail, as did my Alexa voice command to display the Ring Pro's live stream on my TV using an Amazon Fire TV Stick and Amazon Echo.
When it's time to pair the keypad, the Ring app will have you create a four-digit PIN for arming and disarming the system. If you choose to have professional monitoring, you'll need to also come up with a verbal password to help identify you in case you have to talk to a dispatcher. As a reviewer — and a person who has tripped countless alarms in the last few months — I also appreciate that there's a seven-day trial period before professional monitoring becomes active, so you can take time to set up the system without worrying about false alarms. It also gives you time to register the alarm so that you do not incur any fees.
I've owned the Ring Video doorbell for about 6 months and it has been a very pleasant experience. It was very easy to install and easy to use. It has never stopped working or had any major issues. This doorbell lets me know when I get packages delivered, when people approach my door, or ring my doorbell. It is very convenient. The only issue I've had is with motion sensitivity. I get a ton of motion notifications from cars on the road, which are about 35 feet away from the doorbell. It seems very accurate with detecting people but it has an issues with cars, especially large vehicles.