This is the Spotlight Cam’s bigger, badder older brother. Equipped with two ultra-bright floodlights and a siren, the Floodlight Cam is impressive enough to scare away any potential intruders who approach your home. However, its extra power means it must be hardwired to weatherproof electrical boxes, an installation process that may limit where you’re able to set it up. However, if you want to feel secure and safe at all hours of the day, it might be worth the extra effort.


I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
I blame spotty home Wi-Fi for this particular performance problem. It’s not necessarily Ring’s fault that my Wi-Fi network is a weak link in its communication chain, but this is a product that relies on home Wi-Fi to work in the first place. The problems I suffered reveal an intrinsic, inescapable weakness in Ring’s workflow, and should remind us that all Internet-connected home appliances are only as strong as the weakest link in their networks.

Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere.  Ring Alarm is fully customizable and expands to fit any home or apartment. And with Ring Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app.


Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Rign Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app. Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home, extended warranties, exclusive discounts and more! The Ring Alarm Security Kit includes one Base Station, Keypad, Contact Sensor, Motion Detector and Range Extender. You won't be locked into any long-term contracts. You don't need professional installation. You don't even need any tools. It's that simple.
The Ring Doorbell Pro comes with 30 days of Cloud recordings, however, if you would like to record footage after this, you will need to purchase a monthly or yearly Cloud subscription. With the subscription, you will be able to view and download up to 6 months of recordings, and you will also be able to share recordings with friends, neighbors, and law enforcement. Additionally, you can permanently save files that are important to you and delete any unwanted files. The package also includes mounting hardware and a power kit.
The Ring Alarm is equipped with the hardware to serve as a smart hub, though it's not quite there yet. While the base station contains both ZigBee and Z-Wave radios, only the latter is user- accessible, and any noncertified third-party devices that are paired won't trigger the alarm. You can pair Z-Wave products through the Ring app, but they'll only use the base station as a bridge.
I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
The base station connects to Ring Alarm devices using Z-Wave Plus. In theory, it could also connect to third-party devices using the same as well as Zigbee, Wi-Fi, and Bluetooth; however, it cannot currently connect to other devices besides the First Alert Smoke and Carbon Monoxide Alarm. Like abode and Nest, Ring’s Base Station includes battery backup, an integrated siren (104db), and a cellular chip which you can activate by paying just $10 per month. Finally, while you can connect to the Base Station via Ethernet, it’s not required.
By registering you become a member of the CBS Interactive family of sites and you have read and agree to the Terms of Use, Privacy Policy and Video Services Policy. You agree to receive updates, alerts and promotions from CBS and that CBS may share information about you with our marketing partners so that they may contact you by email or otherwise about their products or services. You will also receive a complimentary subscription to the ZDNet's Tech Update Today and ZDNet Announcement newsletters. You may unsubscribe from these newsletters at any time.
This, according to Siminoff, is one of Ring’s key differentiators over home security industry stalwarts like ADT. He repeatedly called ADT and its ilk “marketing companies” on our call, whereas Ring is a product and “mission” company. The goal of most home security providers is to market safety and security and sell that marketing as a product with a lucrative recurring subscription, is the implication, whereas Ring is focused on an overall goal of making neighbourhoods more secure, per Siminoff.
The motion and door/window sensors can be mounted with screws or with Velcro strips (provided). I’m happy the sensors didn’t come from the factory with the strips already attached. I’ve never seen an adhesive strip that didn’t eventually fail, so I prefer to use screws—and peeling those strips off so you can use screws is a major pain. The sensor batteries come preinstalled, so you just pull out a plastic tab when the app tells you to. This enables the battery to touch the electrical contact inside the sensor, powering it up.
Consumer Reports is an independent, non-profit organization dedicated to helping consumers. We make it easy to buy the right product from a variety of retailers. Clicking a retailer link will take you to that retailer’s website to shop. When you shop through retailer links on our site, we may earn an affiliate commission – 100% of the fees we collect are used to support our mission. Learn more. Our service is unbiased: retailers can’t influence placement. All prices are subject to change.
The rest of the kit remains relatively standard. The Ring Alarm entry sensors are about a quarter-of-an-inch bigger than SimpliSafe's sensors and don't perform double duty like Nest's large sensors, which also sense motion. They're easy to install with the included mounting hardware and 3M-branded sticky tape, but they seem unnecessarily large and were hard to place so that the magnets would meet each other on both my front door and the back sliding door.
Get smart security anywhere you need it with Get smart security anywhere you need it with Ring Spotlight Cam Battery a motion-activated security camera with LED spotlights a siren alarm and a rechargeable battery pack. Armed with HD video adjustable motion sensors and instant mobile alerts Ring Spotlight Cam Battery lets you watch over your home from anywhere. ...  More + Product Details Close
×