I have had a very disappointing experience with my Ring Video Doorbell Pro. When it was installed, I had some customer service issues which were fixed quickly. Then after a few days, the unit continually dropped it's signal and didn't work. I would reboot it, as instructed and repeatedly within 24 hours I would lose the signal again. Finally, the unit lost power completely. Every time I called their customer service, they ran me through the same circus of reboots, despite the fact I told them the battery was drained and although the unit was connected to power, it was not working. I've made 5 calls to their customer service department with long waits on hold and the same scripted 'fix' that has not worked. At this point, I will be returning the doorbell & stick up cam to Amazon for a refund of a defective product that Ring does seem to want to support.
Next, they have plans to sell a Ring Smoke & CO Listener that listens for the sound of your smoke detector then sounds your siren and sends an alert if anything is detected. Keep in mind that this is not a smoke detector, but rather a device that will supplement your current smoke alarm system. As already mentioned, you can also buy the First Alert Z-Wave Smoke/CO Alarm, which will connect to your Ring Alarm system.
Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home. You won’t be locked into any long-term contracts. You don’t need professional installation. You don’t even need any tools. It’s that simple.
It doesn't work with the Amazon Cloud Cam indoor home security camera, either. Here's what a Ring spokesperson had to say about it: "Ring Alarm does not work with Amazon Cloud Cam at this time. While I can't comment on the roadmap at this time, what I can tell you is that we will make product decisions based on what will best empower Neighbors with an affordable, effective way to monitor their homes."
The rest of the kit remains relatively standard. The Ring Alarm entry sensors are about a quarter-of-an-inch bigger than SimpliSafe's sensors and don't perform double duty like Nest's large sensors, which also sense motion. They're easy to install with the included mounting hardware and 3M-branded sticky tape, but they seem unnecessarily large and were hard to place so that the magnets would meet each other on both my front door and the back sliding door.
Unfortunately, Ring doesn’t currently, nor does it appear to be adding any type of home automation features, but it is compatible with many third-party smart home services. Although Ring doesn’t offer professional monitoring services, they do offer live streaming when hardwired to your existing doorbells power supply. Ring Live View does not work when using the internal battery. Since most users prefer to use the Ring internal battery, paying for one of the Ring video recording packages is the ideal option.
Quiet Open allows you to bypass an armed sensor simply by touching it. For example, if your system is armed, but you want to check the weather outside, you can press the sensor, and open your door. While I’ve heard only praise for this feature, my initial reaction was that it seems like a security flaw. Your teenagers, for example, can press the sensor and sneak out. Furthermore, there is no identification tied to using the feature. For example, it won’t say, “Rose bypassed the sensor.” Fortunately, you can turn this feature off if you’re concerned.
Ring, an Amazon company, also sells several security sensors. First is the keypad. The keypad runs on battery power, and you can wall mount it or place it on a flat surface. In addition to arming and disarming your system, the Keypad Control Panel allows you to choose between Armed Away and Armed Home. When using the keypad to arm your system, it provides a grace period to reduce false alarms. You can customize the grace period using the mobile app. Finally, you can simultaneously press and hold the check and x buttons for three seconds to trigger the panic alarm.
abode also sells their own line of cameras. They sell an image sensor, which will take three snapshots if it detects motion, and two streaming cameras. I’ve tested two of the three. The two cameras I tested were unfortunately unimpressive, and I found Nest cameras to be vastly superior. abode’s newest camera, not tested, offers two major benefits: FHD 1080P resolution and two-way audio. Of course, there’s also abode iota which offers the same camera specs as the newest abode streaming camera. The benefit of using abode cameras over Nest cameras is free cloud and local storage. abode’s streaming cameras support a microSD card and include three days of free cloud storage. Nest supplies just 3 hours of snapshot storage for free. As described above, if you want more Nest storage, you will need to pay for Nest Aware.
If the security device isn’t try to prevent jamming at all (And the protocol is one way – from sensor to main hub), all the thief need is a 10$-30$ device (definitely not close $1,000) which actively send signals and prevent the good signal to pass (the cheap signal jammer can be adjusted to frequency like you turn on a radio. the frequency itself is probably common in all devices or can be found on device manual) [not putting a security sign is https://en.wikipedia.org/wiki/Security_through_obscurity but it may be better than nothing].
After I finished installing this device I found myself having issues with it for the first 3 days where sensors will go offline for no reason almost every day; suddenly after day 4 maybe, all of the issues disappeared and the system was now working like a well-oiled machine. I reached out to Ring support team and they informed me that there was an automatic update that the brain device was going to perform on its own and that would solve all of the issues I was experiencing. They were indeed 100% correct, after just a few days the system was doing exactly what it was supposed to be doing all along. No issues, no dropped devices, a happy customer here now. If you end up choosing this system and experience issues during the first 3-4 days, please wait a few days for your system to automatically update itself to the latest software and you’ll see the issues magically go away.
This bundle is a pretty comprehensive home security system, but the one thing it doesn't include is a camera. You can add Ring Video Doorbell or Ring Spotlight Cam to it, and both will integrate seamlessly with the pieces in this kit. The motion sensors in Ring's cameras will trigger the alarm in the base station, while also giving you video evidence in case of a break-in.
I agree! This was a great comparison article for me and timely. A neighbor of ours just recently got robbed and led us to upgrade our basic home security features. I am curious if this article will be updated once Abode Iota is launched. I like the al a carte of monitoring with Abode and may end up getting nest outdoor camera with Abode. Thank you again!
2. If you want monitoring of video, check out SimpliSafe. They won’t monitor your motion events, but rather your sensors. If your sensors show an alarm event, they can log into your camera to gather video evidence. They offer what’s called ‘video verification.’ The downside to SimpliSafe, when compared to the options presented in this article, is that it lacks home automation. The system does support Nest Thermostats, Alexa, Google Assistant, and the August Smart Lock Pro, but it doesn’t offer an automation engine. Also, integrations are not free, which is in contrast to what abode, Ring, and Nest offer. Finally, SimpliSafe does not have an outdoor camera though they did recently release a video doorbell and have plans to launch an outdoor camera. abode, Nest, and Ring all lack professional monitoring of video and the cameras are not tied to the alarm as motion sensors. Camera motion activated events are self-monitored.
The Ring Doorbell Pro comes with 30 days of Cloud recordings, however, if you would like to record footage after this, you will need to purchase a monthly or yearly Cloud subscription. With the subscription, you will be able to view and download up to 6 months of recordings, and you will also be able to share recordings with friends, neighbors, and law enforcement. Additionally, you can permanently save files that are important to you and delete any unwanted files. The package also includes mounting hardware and a power kit.
It catches us leaving for work every day and coming home. It catches me when I go to fill the bird feeders. I’ve not had it miss any movement that I’m aware of. If you have motion sensors on, expect more notifications than you think you will get. As said, you’ll get the two from nightfall and sunrise. Plus I get two from me departing for work and my husband departing plus 2 more for each of us coming home. Add on more for checking the mail and anything you may do in the yard. This is where not being limited on storage size is handy. The cloud storage is $30 per year and it keeps videos for 6 months. It doesn’t say anything about size so having these extra videos doesn’t bother me. I find the video quality to be great and I can easily identify who is at the door night and day.
Burglars typically start these capers by ringing the doorbell to determine if anyone’s home. The Ring Video Doorbell, thanks to its built-in video camera with two-way communication, directly addresses this nefarious use case by making the bad guys think you’re always at home. There’s also a motion alert feature that let’s you see who’s come to the door, even if they never press the doorbell button.
Ring, innovator of the famous Ring Video Doorbell, is offering up a full 8-piece home security kit for around 30 percent off. In fact, at $188.98, the 8-piece kit is currently more affordable than Ring’s 5-piece home security kit. This kit has all the trappings of a deluxe home security system and is designed to keep you and your family safe. Out of the box, the kit includes a base station, a keypad, 3 contact sensors, 2 motion sensors, and a range extender.
You have 2 alarm modes: home and away. Using the app you get to chose which sensors will trip home mode and away mode; to be a little more specific, in the app you can select a sensor and check a box next to away and a box next to home if you want it to trip the alarm even if your alarm is active in “home mode” such as when you’re sleeping at night, where motion sensors inside won’t trip the alarm, but doors or windows opening will do so. You can also select a motion sensor and select a lower sensitivity level in case you have pets. You can do all this from the app even away from home.
Well, not long after the training mode came to an end, I made a bonehead mistake. I forgot to get my girlfriend set up with the App and when she came over when I wasn’t home, the alarm went off. Unfortunately, I was not able to cancel her mistake due to me fumbling with a rather clunky app interface on my phone. Luckily the Ring representative from the monitoring team called very quickly and I was able to avoid a cop showing up and a possible charge$$. My interaction with the Ring rep was fantastic. They called very quickly and the person I spoke with was extremely professional, kind and knowledgeable! They made me feel like a valued customer for sure.
The Ring Alarm system has three different modes, which can be set via the keypad or through the iOS and Android apps. There’s the standard disarmed mode that turns off all of the monitoring; an away mode that watches all of the installed sensors for intrusions; and then a “Home” mode, which by default will monitor sensors installed on entryways, but ignores motion inside the house. I’ve used the latter mode as basically a night or sleep setting, since during the day my family moves in and out of the house a lot and would constantly trip the door sensors.
I recently purchased the new Ring security system after owning the video doorbell for a while. I bought this system to allow me to ditch my system and service from a large national provider (42$ per month for monitoring vs 10$)! Firstly, I have been interested in this product and company since I saw Jaime Siminoff on Shark Tank back in 2013. Back then the company was called DoorBot. I like the new name much better.
So let’s talk cost for a minute. For $399, Nest includes a Nest Guard which also acts as a keypad, siren, and motion detector, two Nest Detects which are also motion sensors, and two Nest Tags. An equivalent package from abode would cost $479. A comparable package from Ring would cost $279. However, Ring doesn’t sell a key fob, and the kit includes a range extender, so that needs to be factored into the equation.
My home lacks any sort of doorbell wiring, so the Video Doorbell 2’s battery-powered features appealed to me. To install it, I drilled two holes into the brick around my door, used the angled bracket provided in the box with the Video Doorbell 2 to angle it toward the doorway, and then mounted the actual doorbell to that. (A flat bracket is also provided.) The whole install process took about 10 minutes, since I didn’t have to actually wire anything up. If you have a more complicated setup, Ring provides video tutorials to walk you through it.
It’s worth noting that my Wi-Fi network is based on a Linksys 802.11ac router that’s connected to a Linksys Wi-Fi range extender located about 10 feet from the Ring doorbell (albeit separated by a thick exterior wall). I spent a significant amount of time with Ring’s operations director to fix connectivity problems in the early stages of testing, but even this wasn’t enough to solve all the performance issues. My Wi-Fi is dual-band, supporting both 2.4- and 5GHz, but Ring uses the 2.4GHz band via 802.11b/g/n support.
What I like is the ease of setup. Very user friendly and quality components. The battery powered cameras offer a level of flexibility that our old wired cameras did not. Video is generally good to excellent (if you have a strong wifi router) and quite simple to customize the system to your particular needs (I don’t mind lack of 3rd party integration). And the $10 monthly price for monitoring and video storage is AMAZING (was paying almost $50/mo before).
All the components in the Ring Alarm system use Z-Wave Plus radios and support Z-Wave’s S2 security framework, but Harris told me there’s also a ZigBee radio onboard as well as some other surprises that aren’t discussed in the user manual. “You’ve got Wi-Fi, you’ve got LTE, you’ve got Z-Wave, you’ve got ZigBee….” Harris said. “I’m sure people will open it up and see there’s another radio in there that’s not turned on yet. There’s an awful lot going on in there.”
While the August doorbell offers a more symmetrical picture with no barrel distortion, it doesn't support IFTTT integration like the Ring Pro does, and Ring's monthly cloud fees are a bit more affordable. As such, the Ring Video Doorbell Pro is an Editors' Choice for smart doorbells. The SkyBell HD is another top pick, and offers features that Ring doesn't, such as color night video, free cloud recording, and compatibility with Nest smart home devices.
On the downside there is no way to enable/disable video motion detection clips in sync with the armed status. I only want certain cameras to record when armed stay or away. They really need the option to tell the cameras when to record and when not to record. Other than that the 2-way camera communication is spotty at best, but not really a feature that’s important to me. Adding live video to the online access would be a BIG plus too (currently you can only access the cameras through the app).
Finally, you can add third-party Z-Wave and Zigbee devices. abode has a list of compatible devices on their site. The list includes products by Aeon, Aeotec, Enerwave, Fibraro, First Alert, FortrezZ, GE, Linear, Kwikset, Leviton, Schlage, Iris, Sensative, ZooZ, and Netvox. abode also sells their own Home Automation Power Outlet & ZigBee Extender. The device will turn any outlet into a smart outlet, allowing you to control plugged-in devices and include them as part of your automation recipes. The switch also acts as a ZigBee range extender.
System is very responsive and mobile alerts are sent in real time. If the alarm goes off, you will get a mobile alert from the app with information about the actual sensor tripped; this app alert will be followed a few seconds later by a phone call from a representative checking on your well being. They will ask you for your “safe word” and if you cannot give the correct one they will dispatch a police officer. I also noticed if you cancel quickly enough with the app then they will not call you; I once cancelled after a few seconds through the app and the phone call came in, but before it could be answered it was already disconnected - which was great, no need to explain myself.
Just as heads-up, customer support from Ring was top-notch. After a week of use, I had an issue with a sensor that wasn’t communicating properly. Fortunately it didn’t trip the alarm (I say fortunate as I wouldn’t want to local police to show up for faulty sensor). A late night call to the Ring customer service, which appears to be U.S. based, helped to resolve the issue. The rep was professional and patient. All told, I’m glad I chose Ring.
The real failure of this device is its “motion detection”. To illustrate, I’ve attached photos and video. It goes off about every 5 minutes (leaving battery life that lasts 3 days), even for things across the street, even though it’s supposed to have a 5’ range (also attached). The kicker is that it Doesn’t actually catch people coming up to the door. It only shows me coming in our out about 1 in 10 times. I even thought about making a video to show this, but it’s not worth my time for this Piece of junk. Bottom line: