Now, on paper, this doesn’t sound like a frustrating process. And in best-case scenarios, the app would load as quickly as what you see in my video at the top of this article. But oftentimes these ostensibly brief steps would take forever. Sometimes my phone would be in another room. Sometimes I couldn’t quickly get it out of my pocket, or I’d fumble with my unlock code. But worst of all, sometimes the video chat screen would take an eternity to load.
Ring Doorbell cameras are some of the most popular options on the market today. But, it can be confusing to determine which one is right for your needs (there are quite a few to select from). However, these doorbells are designed to be very reliable, easy to install, and simple to use. They allow you to see, hear, and speak to those people who come to your door. You can access the doorbell camera from your computer, tablet, or through an app on your mobile phone. Here is a look at some of the options.
Finally, you can add third-party Z-Wave and Zigbee devices. abode has a list of compatible devices on their site. The list includes products by Aeon, Aeotec, Enerwave, Fibraro, First Alert, FortrezZ, GE, Linear, Kwikset, Leviton, Schlage, Iris, Sensative, ZooZ, and Netvox. abode also sells their own Home Automation Power Outlet & ZigBee Extender. The device will turn any outlet into a smart outlet, allowing you to control plugged-in devices and include them as part of your automation recipes. The switch also acts as a ZigBee range extender.

I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
To start I shut off the breaker that powers my existing doorbell before removing it and detaching the two wires. I slid off the Ring Pro's detachable faceplate and attached the two wires to the terminals. I then attached the doorbell to the outside of my house using the included mounting screws. I already had a Ring account from previous reviews but if you haven't created one, now's the time to download the app and do so.

For larger spaces like your garage door or back patio, it might benefit you to invest in an additional motion detector. These devices can be configured to detect movement up to 30 feet, sending alerts to your phone whenever something enters the monitored area. As long as you mount the detector on a wall or corner of a room above seven feet, it shouldn’t be triggered by movement from small pets or pests, though that has still been known to happen.


1. Nest can record continiously which eliminates the problem of sleepy security cameras. As far as Ring cameras, Ring Pro offers a pre-buffer. As far as their other cameras, I’ve only tried Ring Spotlight wireless. It’s a battery-powered camera and does not pre-buffer. I believe I heard that the wired version does pre-buffer, but I haven’t personally tried it.
System is very responsive and mobile alerts are sent in real time. If the alarm goes off, you will get a mobile alert from the app with information about the actual sensor tripped; this app alert will be followed a few seconds later by a phone call from a representative checking on your well being. They will ask you for your “safe word” and if you cannot give the correct one they will dispatch a police officer. I also noticed if you cancel quickly enough with the app then they will not call you; I once cancelled after a few seconds through the app and the phone call came in, but before it could be answered it was already disconnected - which was great, no need to explain myself.

Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere.  Ring Alarm is fully customizable and expands to fit any home or apartment. And with Ring Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app.
Unfortunately, there’s no video-on-demand (VOD) feature that lets you view the outside world whenever you want. Instead, you have to wait for someone to approach the door. VOD appears to be on many users’ wish lists, and Ring says it’s working on adding that feature. With VOD built-in, the doorbell would instantaneously turn into a full-featured security camera, so let’s hope we see this addition soon.
I would go beyond resolution and consider what you want the camera to do. My favorite outdoor camera is Arlo Pro, but a battery-powered outdoor camera will come with its own challenges. In my front yard, I need 24/7 continuous recording which is Nest, but I can’t deal with the way the giant wire looks on Nest Outdoor so I used Nest Cam Indoor filming through a window for a couple of years, which also has its own challenges, until I swapped out my Ring Doorbell for Nest Hello. Nest Hello is Nest’s video doorbell and it can record continuously.
My connectivity issues notwithstanding, I’ve come to appreciate Ring’s motion alert feature, which sends the sound of a wind chime to your phone when someone approaches your door. Once you hear the chime, you can open a video window to talk with the visitor if you’re so inclined. Alternately, you can just let Ring’s cloud-based recording feature ($3 monthly or $30 annually) pick up the video of your visitor, and watch it later.
It’s worth noting that my Wi-Fi network is based on a Linksys 802.11ac router that’s connected to a Linksys Wi-Fi range extender located about 10 feet from the Ring doorbell (albeit separated by a thick exterior wall). I spent a significant amount of time with Ring’s operations director to fix connectivity problems in the early stages of testing, but even this wasn’t enough to solve all the performance issues. My Wi-Fi is dual-band, supporting both 2.4- and 5GHz, but Ring uses the 2.4GHz band via 802.11b/g/n support.

Once your trial of ring video recording ends, you can no longer access past events without a paid subscription. That's not such a big deal until you realize what counts as a "recent event". If you don't press the button within about 5 seconds of getting a motion alert, you missed your shot and now it's a past event. Say the UPS guy comes, presses the doorbell and walks off immediately. Your phone properly notifies you that somebody is at your door, but you've got something in your hands, or your phone is in your pocket or any other distraction is going on that takes 5 seconds to finish. By the time you hit the notification banner and go into the app, it will take you to a screen that says you need a paid subscription to see past events. Earlier today I got a notification WHILE holding my phone, clicked it immediately, but the live video loaded slowly and by the time it did load, the "event" was considered done and it took me to the screen saying I needed to pay. I have no problem paying to record everything and be able to pull up events from hours, days or weeks ago, but needing to pay because 5 seconds went by and the app loaded slowly is a rip-off. This is a $200 item which replaces a $5 hardware store doorbell, and the ONE thing it's supposed to do (show you live video of rings or motion events at your door) doesn't work about half the time without paying extra. There needs to be about a 30 second window at minimum where you can see what's going on without having to pay extra.
×