If you're set to Home and Armed and you trigger an entry sensor that's fitted anywhere but your front door, the base station will sound a piercingly loud 104-decibel alarm until you can get to the keypad, or to your phone to deactivate it. If you're Away, both the motion and the entry sensors will trigger the alarm — unless, again, the entry sensor is affixed to the front door, in which case it will start a 60-second countdown until you enter your PIN (you can adjust the timer as you need).
Below the Live View button is a series of feature buttons. Event History takes you to the same events list that you'll see in the My Devices screen; Device Health lets you check voltage, Wi-Fi signal strength, and system status; Linked Chimes is where you go to pair the doorbell with an external plug-in Ring Chime ($29) or Chime Pro ($49); and Motion Settings lets you adjust motion sensitivity, set up motion zones, and create a motion schedule that determines when motion alerts are active.
Ring makes sure that no matter your experience level, you're empowered with information. The minute you open the box, there are neatly packaged containers with nearly every component needed to install the kit. Before you do any of that, however, you'll have to add each device through the Ring mobile app, which is extremely straightforward — all you have to do to start setting up accessories is tap the button that says "Set up a new device."
All these new DIY systems pretty much rely on cellular and/or Wi-Fi. It seems that although it makes things more accessible, cheaper and easier to install, that’s where most of the glitches, or inconsistent alarm notifications come from, right? But in general it’s good that these systems have been made available for us all to choose from. Thank you for helping us navigate all the choices.
You have 2 alarm modes: home and away. Using the app you get to chose which sensors will trip home mode and away mode; to be a little more specific, in the app you can select a sensor and check a box next to away and a box next to home if you want it to trip the alarm even if your alarm is active in “home mode” such as when you’re sleeping at night, where motion sensors inside won’t trip the alarm, but doors or windows opening will do so. You can also select a motion sensor and select a lower sensitivity level in case you have pets. You can do all this from the app even away from home.
This, according to Siminoff, is one of Ring’s key differentiators over home security industry stalwarts like ADT. He repeatedly called ADT and its ilk “marketing companies” on our call, whereas Ring is a product and “mission” company. The goal of most home security providers is to market safety and security and sell that marketing as a product with a lucrative recurring subscription, is the implication, whereas Ring is focused on an overall goal of making neighbourhoods more secure, per Siminoff.
With 1080HD video, custom motion zones and an ultra-slim design, Ring Video Doorbell Pro is our most advanced Doorbell yet. Ring Video Doorbell Pro sends you instant mobile alerts when anyone presses your Doorbell or triggers the built-in motion sensors. When you answer the alert, you can see, hear and speak to visitors from your smartphone, tablet or PC. With customizable motion zones, Ring Pro lets you focus on the most important areas of your home. It also includes four interchangeable faceplates, so you can pick a color that matches your style and your home. And with our complementary tool kit, you can get your Doorbell set up in just minutes.

Ring offers a wide variety of doorbell and exterior security lighting features that range in price from $99.99 to $499.00, as well as plenty of accessories for them that range in price from $10.00 to $49.00. These accessories include options such as a solar panel, ring chime, quick release battery pack and more. And, they have two monthly video recording packages that range from $3.00 per month ($30 annually) to $10.00 per month ($100 annually).

There's also a Motion Snooze button that lets you temporarily disable motion alerts for 15 or 30 minutes or for 1 or 2 hours. The App Alert Tones button lets you select one of 20 sounds to play when the doorbell is pressed, or one of 16 sounds to play when motion is detected, and the Shared Users button lets you add users who can view video and receive alerts. Use the Ring+ button to link the Ring app to one of Ring's partners such as Wink, Kevo, LockState, and Wemo. Once linked, you can access a partner app from within the Ring app.


The door/window sensors (also called contact sensors) work pretty well, but the same cannot be said about the motion sensors; they will detect motion after there’s been plenty of movement (if I walk the hallway and enter a room it will not detect, but if I sit for a few seconds moving in the hallway it will detect it then). This is still not a show stopper for me, as I have a dog and don’t plan on buying any more motion sensors, it will be all contact sensors.
The Ring Video Doorbell Pro offers almost everything you'd want in a smart doorbell. It's fairly easy to install, sports a slender design with interchangeable faceplates, and delivers sharp 1080p video day and night. As with the August Doorbell Cam Pro, the Ring Pro uses pre-buffering technology to show you what transpired prior to a motion trigger, and lets you view live video on an id="354749">Amazon Echo Show device using Alexa voice commands.

Below the Live View button is a series of feature buttons. Event History takes you to the same events list that you'll see in the My Devices screen; Device Health lets you check voltage, Wi-Fi signal strength, and system status; Linked Chimes is where you go to pair the doorbell with an external plug-in Ring Chime ($29) or Chime Pro ($49); and Motion Settings lets you adjust motion sensitivity, set up motion zones, and create a motion schedule that determines when motion alerts are active.
After I finished installing this device I found myself having issues with it for the first 3 days where sensors will go offline for no reason almost every day; suddenly after day 4 maybe, all of the issues disappeared and the system was now working like a well-oiled machine. I reached out to Ring support team and they informed me that there was an automatic update that the brain device was going to perform on its own and that would solve all of the issues I was experiencing. They were indeed 100% correct, after just a few days the system was doing exactly what it was supposed to be doing all along. No issues, no dropped devices, a happy customer here now. If you end up choosing this system and experience issues during the first 3-4 days, please wait a few days for your system to automatically update itself to the latest software and you’ll see the issues magically go away.

The other thing of note is its lack of smart home partners. Despite being owned by Amazon, Ring's system doesn't work with Alexa or any other major smart home platforms. If you want to arm and otherwise get the status of your home security system via voice commands, the Ring Alarm Security Kit isn't the right option for you. Ring does specify in its support section that it's working on these integrations for a future release.
Once your trial of ring video recording ends, you can no longer access past events without a paid subscription. That's not such a big deal until you realize what counts as a "recent event". If you don't press the button within about 5 seconds of getting a motion alert, you missed your shot and now it's a past event. Say the UPS guy comes, presses the doorbell and walks off immediately. Your phone properly notifies you that somebody is at your door, but you've got something in your hands, or your phone is in your pocket or any other distraction is going on that takes 5 seconds to finish. By the time you hit the notification banner and go into the app, it will take you to a screen that says you need a paid subscription to see past events. Earlier today I got a notification WHILE holding my phone, clicked it immediately, but the live video loaded slowly and by the time it did load, the "event" was considered done and it took me to the screen saying I needed to pay. I have no problem paying to record everything and be able to pull up events from hours, days or weeks ago, but needing to pay because 5 seconds went by and the app loaded slowly is a rip-off. This is a $200 item which replaces a $5 hardware store doorbell, and the ONE thing it's supposed to do (show you live video of rings or motion events at your door) doesn't work about half the time without paying extra. There needs to be about a 30 second window at minimum where you can see what's going on without having to pay extra.
×