Ring also sells several cameras including the Ring Video Doorbell, the Video Doorbell 2, Ring Elite, and Video Doorbell Pro. They also sell a Floodlight Cam, Spotlight Cam, and two versions of their Stick Up Cam. Most of the cameras are geared toward outdoor use with the exception of Stick Up Cam Wired and Stick Up Cam Battery. The two cameras can be used indoors or outdoors.
Update 1/24/16 - I have found a fantastic use for the Ring Doorbell and Chime. My mother-in-law, now in her 90s, lives by herself. She has become hard-of-hearing and often does not hear the doorbell. By installing the Ring on her door, she now is bothered much less (solicitors tend to recognize it and don't seem to like it) and when someone rings the bell, the Chime, placed by her favorite chair, gives her a better chance of hearing someone at the door.

If you're set to Home and Armed and you trigger an entry sensor that's fitted anywhere but your front door, the base station will sound a piercingly loud 104-decibel alarm until you can get to the keypad, or to your phone to deactivate it. If you're Away, both the motion and the entry sensors will trigger the alarm — unless, again, the entry sensor is affixed to the front door, in which case it will start a 60-second countdown until you enter your PIN (you can adjust the timer as you need).
Nest, Ring, and abode all sell cameras. Nest works with Nest Cams including the indoor and outdoor cameras, Nest IQ both indoor and outdoor, as well as Nest Hello. When Nest Secure detects an alarm event, it will trigger your Nest cameras to take a snapshot. If you have email alerts turned on, the cameras will email you a snapshot of the event. It can also send a push notification to your phone.
The upshot: When that sketchy person comes to your door asking for “charitable donations,” you can compliment his appearance—nice prison tats!—and tell him you’re too busy to talk right now. Who knows, maybe you’re feeding your Belgian Malinois attack dogs. Or are you? The robber will never know that you’re actually speaking to him from a restaurant. In another state.
So what happens if an Alarm is triggered? If an event is detected, you will get an email and an instant push notification to your phone which you can swipe to open the Nest App. From the Nest App, you can see which sensor triggered the alarm, and you will be presented with two options: call the police or turn the alarm off. If you have a Nest Cam, you will be able to view footage from the event simultaneously. If you have multiple Nest Cams, you can swipe through to a view a live feed from all of your cameras. If you’re subscribed to Nest Aware, the Sightline feature will bookmark the event so next time you access your camera’s timeline, you’ll see a red bar. Tap on the red bar to review the footage of the event. Of course, while all of this is happening, your siren will sound.
All these new DIY systems pretty much rely on cellular and/or Wi-Fi. It seems that although it makes things more accessible, cheaper and easier to install, that’s where most of the glitches, or inconsistent alarm notifications come from, right? But in general it’s good that these systems have been made available for us all to choose from. Thank you for helping us navigate all the choices.

I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
Ring, an Amazon company, also sells several security sensors. First is the keypad. The keypad runs on battery power, and you can wall mount it or place it on a flat surface. In addition to arming and disarming your system, the Keypad Control Panel allows you to choose between Armed Away and Armed Home. When using the keypad to arm your system, it provides a grace period to reduce false alarms. You can customize the grace period using the mobile app. Finally, you can simultaneously press and hold the check and x buttons for three seconds to trigger the panic alarm.
If you do have smart lights and want to control them with a contact sensor or motion detector, you will need to install separate ones in addition to Ring’s, which can make your front door look like it’s grown barnacles with all of the sensors installed. Another simple integration would be to set a smart thermostat to its away mode when the Alarm is set to away, and then switch it back to its home mode when the Alarm is disarmed, but that’s currently not possible either.
abode uses the abode app. If an event occurs, you will receive a notification on your phone. From the app, you can decide how to respond to events. You can review video footage, notify the police, the monitoring center, or even your family. You can also view sensor history and manage your rules. For example, you can create a “coming home” rule that turns on the lights and unlocks the door. And of course, you can use the app to arm and disarm the system.

The biggest physical difference between the Doorbell 2 and the original is the new, slide-out battery. With the first model, recharging the battery required removing the entire doorbell from the frame and plugging it in for five to six hours. The new, removable battery (which looks like something you might find in a DSLR or camcorder) is much easier to charge: you just remove the front panel of the doorbell (a security screw underneath needs to be removed with the included screwdriver first), slide the battery out, and plug that into a Micro USB cable. Charging still takes five or six hours — it’s a hefty, 6,100mAh battery and this doesn’t have any quick charging features you might find on a smartphone — but the modularity of this design means you can buy a second battery and put that in to keep your doorbell functional while the other charges. Ring provides one battery in the box, but you can buy spares from Ring’s website for a reasonable $20.
By purchasing this system you’re almost certain that they will come out with upgrades and updates to this product and ways to integrate it with Alexa and smart home devices. If you encounter any kind of issues, they will have someone listen to you and actually give you a solution rather than one of these knock off Chinese products that will give you excuses for faulty behavior but not solutions.
I bought this system to replace the ADT system I had for years. This system along with four Contact Sensors replaced what I had from ADT. The cost of the Ring system and year of monitoring was less than six months of monitoring from ADT. The system comes packaged nice a secure, which I am thankful for since the deliver person wasn't gentle dropping the box on my porch. I had downloaded the app and registered before the system arrived, so that part was taken care of. The included instructions and phone app walk you through the setup. It was painless and completed in about 10 minutes. I set up everything on my dining room table to go through the registration process. Once done, I installed the components where the old hardware was. Ring includes everything you need to mount (double sided tape and/or screws) all the components. Registering for monitoring was very simple too. One thing I learned that I want to pass on. do not remove the little battery tabs until the app tells you to. If you do, just open the cover, pull the battery and reinstall the tab. Just pulling the battery and reinstalling it doesn't reset the device.
There's also a Motion Snooze button that lets you temporarily disable motion alerts for 15 or 30 minutes or for 1 or 2 hours. The App Alert Tones button lets you select one of 20 sounds to play when the doorbell is pressed, or one of 16 sounds to play when motion is detected, and the Shared Users button lets you add users who can view video and receive alerts. Use the Ring+ button to link the Ring app to one of Ring's partners such as Wink, Kevo, LockState, and Wemo. Once linked, you can access a partner app from within the Ring app.
3 - If you do not answer the alert fast enough, you are locked out-- even though someone is standing at your front door. You cannot "turn on" the camera from your phone or tablet. If someone is there and you do not have an "ACCEPT" button on the screen, there is just no way to see or talk to them. This is obviously a software flaw. You should always be able to "wake" a camera remotely and talk to a person at your front door. Or maybe you just want to see the view outside your front door. You should be able to access the camera / microphone and enjoy your front yard.
×