The Ring Pro captures video at 1080p and has a 160-degree field of view. It uses three infrared LEDs to provide up to 30 feet of night vision and has a built-in motion sensor, a microphone, a speaker, and an interior chime. The camera uses 802.11n circuitry (2.4GHz and 5GHz) to connect to your home Wi-Fi, and requires a two-wire 16-24 volt power source (the same power source used for traditional doorbells). In addition to the camera, there's a doorbell button on the face of the device surrounded by an LED ring that glows blue when the button is pressed. There are two terminals on the back, and a setup button on the right side that you can get to by removing the faceplate.
When we reviewed the original Ring Video Doorbell three years ago, it earned high marks for its easy installation, sharp video quality, and motion detection, but was dinged for its middling audio quality, lack of on-demand video, and short battery life. With the new Video Doorbell Pro ($249), Ring has addressed all of these gripes and added some handy features including 1080p video, custom motion zones, pre-buffering to capture what was going on before the motion sensor was triggered, support for Alexa voice commands, and interoperability with other smart devices via IFTTT. All this earns it our Editors' Choice for video doorbells.
The system was quite easy to install. Having six sensors to place seems like a lot, until you realize you can’t cover everything though you can certainly cover enough. I found the system to be very responsive whenever it was armed or a sensor was set off (both the app and e-mail notifications were received mere seconds after an event). This is in marked contrast to a non-Ring security camera I use to monitor the entrance that can take several minutes or longer to send me notifications. The siren too was fairly loud, as I found out one early weekend during testing.
Ring Doorbell cameras are some of the most popular options on the market today. But, it can be confusing to determine which one is right for your needs (there are quite a few to select from). However, these doorbells are designed to be very reliable, easy to install, and simple to use. They allow you to see, hear, and speak to those people who come to your door. You can access the doorbell camera from your computer, tablet, or through an app on your mobile phone. Here is a look at some of the options.
Next, they have plans to sell a Ring Smoke & CO Listener that listens for the sound of your smoke detector then sounds your siren and sends an alert if anything is detected. Keep in mind that this is not a smoke detector, but rather a device that will supplement your current smoke alarm system. As already mentioned, you can also buy the First Alert Z-Wave Smoke/CO Alarm, which will connect to your Ring Alarm system.
abode also sells their own line of cameras. They sell an image sensor, which will take three snapshots if it detects motion, and two streaming cameras. I’ve tested two of the three. The two cameras I tested were unfortunately unimpressive, and I found Nest cameras to be vastly superior. abode’s newest camera, not tested, offers two major benefits: FHD 1080P resolution and two-way audio. Of course, there’s also abode iota which offers the same camera specs as the newest abode streaming camera. The benefit of using abode cameras over Nest cameras is free cloud and local storage. abode’s streaming cameras support a microSD card and include three days of free cloud storage. Nest supplies just 3 hours of snapshot storage for free. As described above, if you want more Nest storage, you will need to pay for Nest Aware.
I got the Costco version a month ago. Very happy with the system. I came from Simplisafe, while I liked that service you had to pay for $25/mo plan in order to use their App (basic monitoring is $15/mo for Simplisafe). Rings app is waaaay better and is free to use even without monitoring, I'm currently on my home monitoring trial with Ring, but will definitely sign up for the full year with no hesitation (1/3 of the cost I was paying). No issues integrating the First Alert Smoke and CO detectors (Simplisafe can only use their products). Also if you have ring cameras the recordings for that are included in the $10/mo or $100/yr
Even if you experience a power outage, both security systems will continue to work thanks to cellular connectivity. This feature is available from Nest for an additional $5 per month or $50 for the year. Ring includes this feature as part of their Protect Plus plan. Nest’s backup battery will last for 12 hours, while Ring’s will last for 24. With a longer battery life and an included cost, Ring is the clear winner here.
Like the hardware, Ring’s Protect Plus service is significantly less expensive than other options. It costs $10 per month and has no long term contract commitments. Nest offers a similar service, but it starts at $19.99 per month with a three-year contract and jumps to $29.99 per month if you opt for no commitment. ADT, one of the largest traditional home security services, has plans that start at $28.99 per month and requires a three-year commitment.
It’s worth noting that my Wi-Fi network is based on a Linksys 802.11ac router that’s connected to a Linksys Wi-Fi range extender located about 10 feet from the Ring doorbell (albeit separated by a thick exterior wall). I spent a significant amount of time with Ring’s operations director to fix connectivity problems in the early stages of testing, but even this wasn’t enough to solve all the performance issues. My Wi-Fi is dual-band, supporting both 2.4- and 5GHz, but Ring uses the 2.4GHz band via 802.11b/g/n support.
The keypad has 12 backlit buttons on the left-hand side and three in a circle on the right. You create a four-digit PIN during setup, which you’ll tap into the keypad when you arm and disarm the system (you can also do this from the Ring app, which is available for Android and iOS devices. It’s the same app used for Ring’s video doorbell and security cameras, although there’s currently little integration between the cameras and the security system.)
Finally, unlike abode’s base station (iota does not require Ethernet), Ethernet is not required to use Nest Secure. Nest likes to make things easy and they send everything you need, including batteries, to get your device up and running. Nest Guard ships with a 6-foot cable with a power adapter and CR123 batteries for the sensors. My system already had the batteries installed which made setup even easier.
In February 2018 at 2AM Ring came in handy. I received the "Motion Detected" alert on my phone and saw an unknown, adult, male, holding a large black object near his side, walking up my driveway, and towards my front door. The male looked directly at the Ring, stopped, turned around, walked back into the street, got into a vehicle and left. I like to believe Ring deterred this guy from committing a crime. After that moment I remembered I never did an Amazon review for Ring. So here it is. Do yourself and/or family a favor and get the Ring. Peace of mind and makes life easier. SEE ATTACHED PICTURES FOR DETAILS.
After I installed the second Ring I noticed I was not able to connect as quickly and sometimes not at all to the doorbell. I watched a few YouTube videos for troubleshooting and BOOM! I found the issue (I can not fault Ring for this). My current doorbell transformer was only max 16V of power. I went and purchased a max 24V transformer and a plug-in WiFi extender (approximately $50 total for both). This solved the issue and we were able to connect to both doorbells with no problems. Since July of 2017, and the upgrades, we have had no issues. We had temperatures as low as -20 degrees Fahrenheit and they were still working.
In terms of larger home integration, Nest is the very definition of a smart device. Its Works with Nest program automatically instructs connected products (such as smart lighting and thermostats) to perform their tasks without you having to tell them what to do. It’s an exceptionally hands-off solution, though you can still tweak it with custom preferences.
From the app, you can control and manage your Nest Secure system. Of course, you can arm and disarm your system, but you can also see sensor status as well as sensor history. For example, you can see if your door is open or closed and you can see when it was last opened and last closed. You can also use the app’s Remind Me feature to remind you to arm your system if you forget to do so.
My Wi-Fi problems notwithstanding, both the doorbell and chime accessory were easy to pair with my wireless network. Just a word of caution: If you’re using a Wi-Fi range extender, make sure to pair the doorbell outside your house, right on your doorstep. This will ensure that Ring finds the extender, and not your router. If you pair the doorbell inside your home, you run the risk of pairing it with your main Wi-Fi router, especially if your router and range extender have different names.
This versatile Hampton Bay Door Bell Chime works This versatile Hampton Bay Door Bell Chime works in any home installation. For a Wired installation you'll need a Wired Push Button and a 16 VAC/10 VA Low-Voltage Transformer. To use wirelessly you'll need 3 "C" batteries and a Hampton Bay Wireless Push Button. Replacing your current basic Door Bell ... More + Product Details Close
My home lacks any sort of doorbell wiring, so the Video Doorbell 2’s battery-powered features appealed to me. To install it, I drilled two holes into the brick around my door, used the angled bracket provided in the box with the Video Doorbell 2 to angle it toward the doorway, and then mounted the actual doorbell to that. (A flat bracket is also provided.) The whole install process took about 10 minutes, since I didn’t have to actually wire anything up. If you have a more complicated setup, Ring provides video tutorials to walk you through it.
Put whole-home security in your hands with Ring Alarm. When the system is armed, it sends instant alerts to your phone and tablet whenever doors or windows are opened and when motion is detected at home, so you can monitor your property from anywhere. Ring Alarm is fully customizable and expands to fit any home or apartment. And with Rign Video Doorbells and Security Cameras, it lets you control your entire home security system from one simple app. Even if the power goes out at home, your property will still be protected by the complimentary 24-hour backup battery. And for only $10 a month, you can upgrade to Ring Protect Plus and enjoy 24/7 professional monitoring with cellular backup, unlimited video recording for Ring Doorbells and Cameras at your home, extended warranties, exclusive discounts and more! The Ring Alarm Security Kit includes one Base Station, Keypad, Contact Sensor, Motion Detector and Range Extender. You won't be locked into any long-term contracts. You don't need professional installation. You don't even need any tools. It's that simple.